Please read the guide carefully. If possible, please also refer to other split keyboard construction guides as reference.
PCB#
| Name | Count | Remarks |
|---|---|---|
| PCB | 2 | 1.6mm if use 3D printed case |
| ProMicro | 2 | nice!nano |
| Diodes | 46 | SOD-123 or DO-35 |
| Reset switch | 2 | 3*6*5 |
| Battery switch | 2 | MSK-1102-1.5H |
| Battery socket | 2 | PH2.0 2P |
| Battery | 2 | 3.7V lithium (max size 40*50*70) |
| PCB sockets | 46 | Compatible with MX and Gateron low profile, and Kailh choc if using choc version PCB |
| Key switches | 46 | Only compatible with MX style |
| Keycaps | 46 | 1u cap |
Optional#
RGB and Oled#
| Name | Count | Remarks |
|---|---|---|
| OLED | 2 | 0.91 inches |
| SK6812MINI-E | 58 | Install all lights as they are connected in series |
Case#
General#
| Name | Count | Remarks |
|---|---|---|
| Spacer M2 12mm | 4 | For OLED cover |
| Screw M2 | 24 | At least 3mm |
| Rubber feet | ANY | For anti-slip purposes |
Transparent Explorer#
| Name | Count | Remarks |
|---|---|---|
| Top plate | 2 | 1.5mm-4mm |
| Bottom plate | 2 | At least 1.5mm |
| OLED cover | 2 | At least 1mm |
| Spacer M2 7mm | 10 | Between pcb and bottom plate |
3D Printed#
| Name | Count | Remarks |
|---|---|---|
| Spacer M2 7+4mm | 10 | Between pcb and bottom plate |
| Hot melt screw M2*3*3.5 | 10 | Used for integrating 3D printed case |
| 3D-printed case | 2 | Please select printing materials freely |
| OLED cover | 2 | 2mm |
| Bottom plate | 2 | 2mm |
